The SA1002 provides a high performance capability to measure the EMC compliance of your products. It...
Read More
The SA3000 is a powerful, fully featured, EMC analyser. It will measure both conducted and radiated ...
The AC1000 achieves its unique price/performance ratio by actively adjusting the incoming mains wave...
The Laplace Harmonics and Flicker analyser provides the user with a complete system for testing prod...
The CTK probes are powerful diagnostic tools that are an ideal complement to conventional EMC test e...
Just 5 models to cover over 25 different cable typesUser configurableFully compliant (IEC61000-4-6)E...
Key PointsPre-Amplifiersself containedCalibratedLow noiseHigh gain
The effectiveness and ease of conducted emission measurements can be enhanced by the use of appropri...
The Laplace antennas cover 3 main groups...Conventional log periodic types for OATS applications.Min...
Safe and reliable operation by using safety interlock, warning lamp and emergency stop functionsVolt...
Small and compact meter with clear analog indication.Triple function:Gauss meter, magnetic field, 50...
Key PointsEliminates requirement for the 6dB attenuator in the RF feed.Fully calibrated.All include ...
Laplace supply a vast range of CDNs that are fully compliant to IEC61000-4-6.In addition to a range ...
IEC61000-4-6 compliant tests require several elements. These are:Signal generator (Synthesiser)Power...
The ease and effectiveness of conducted emission measurements can be enhanced by the use of appropri...
Key PointsTraceable output level for complete integrityCable adaptors for any standard mains output ...
The TDM-200 Power Density Meter measures the RF field strength over the range 0.001 to 2000uW/sq.cm....
These kits provide a means of measuring radiated emissions (and optionally conducted emissions too) ...
The ERS is a comb generator that radiates RF continuously every 2MHz over the range 30MHz - 1000MHz....
Commonly used EMC emissions standardsClcik below for a selection of the emissions standards used for...
The EMC Directive lists many standards applicable to different product types. There are therefore a ...
The FTR Faultracker is a compact recording device which can be connected to up to 16 points in an el...
The FTR FaulTracker is a recorder/monitor specifically designed to check the operation of electrical...
Standards: IEC/EN61000-3-3Limitation of voltage fluctuations and flicker. (Equipment input curren...
These compact sensors act as an alarm and are triggered by high levels of RF radiation. They are int...
Laplace can supply test equipment for all RF immunity test requirements. These cover both radiated R...
Immunity tests are created to ensure that the product will work as specified in a typical environmen...
Key PointsAvoid mis-connectionsAvoid wear and tear on connectorsFaster testing, better productivityS...
All commercial LISNs include an artificial hand connection and a transient limiter. This adds a 30dB...
Probes sets are available as either active or passive. In each set there are two types of probe, E f...
These Pre-Selectors are high specification, switched band filters which track the scanning of the EM...
EMC emissions can be at very low signal levels and pre-amplifiers can help to improve S/N ratio. The...