M40 Hybrid Connectors for Larger Servo Systems

Larger servo systems still benefit from a single cable, but they need more capacity than an M23 can offer. M40 hybrid connectors from AP Technology carry power and data in one housing for higher powered motors and heavier axes. Applications include large handling systems, presses and heavy automation. The choice of data element, either two pole or Ethernet, gives designers some room to match the connector to the drive's feedback or network approach. Across the hybrid ranges, housings are nickel plated brass with crimp contacts, EMC shielding, a -20°C to 130°C temperature range and IP66/67 sealing when connected. The minimum mating life is 500 cycles. Fewer cables and fewer connectors also mean fewer points to inspect, which is usually welcomed by whoever has to maintain the machine. Hybrid connectors put power and signal contacts inside one housing. The Intercontec 723 Htec series is an M23 design with 5 power and 6 signal contacts plus a Quadrax bus module for fast industrial Ethernet.

When decentrally controlled servo motors are daisy chained, it can run 850VDC at up to 30A and accepts conductors up to 4mm² cross section. If you are looking to reduce vendors, AP Technology's cross referral service can review existing part numbers or a full bill of materials and recommend suitable alternatives from its line card. Data sheets, samples and costs follow, so a switch can be judged on real information. Partner brands include Intercontec, Bimed, Tecnikabel, TKD, ILME and Hugro. For help with M40 hybrid connectors for larger servo systems, speak to the AP Technology team at Brook Industrial Estate, Hayes, on 020 8848 3074. You can also email your requirement to connect@aptechnology.biz.