multiPANEL - The premium design HMI enclosure

(UL approval only valid for MPD 7000+7011) Up to IP 65 The most important product characteristics: Enclosure material: aluminium profiles, stainless steel decorative inlays Enclosure surface: body and rear wall or doors RAL 9005 Profile enclosure – high-precision production from 150 x 150 mm to 800 x 800 mm Firmly glued aluminium front plate 2 enclosure heights: 70 and 85 mm Rear wall bolted (only MPD 00), bolted with hinges or locks and hinges, RAL 9005 Connection to the profiPLUS 50 and taraSMART suspension solutions Enclosure seal: Silicone foam multiPANEL offers the option of integrating every conceivable application.

The enclosure front facilitates the permanent installation of a front plate or glass front, e.g.

for touch applications.

Almost borderless, with flush installation and permanently connected with the enclosure.

Suitable cut-outs for switches and more are included in the service provided by ROLEC, and are established in the production department at the German headquarters in accordance with customer specifications.

With the flat multiPANEL 70 version, the rear wall is optionally available with a flush rear wall, which can be supplied as a fully bolted version, bolted with hinges or with locks and hinges.

multiPANEL 85 is also available for an even greater enclosure depth.

Internal mountings can naturally also be installed in the door.

For this purpose, stays are fitted inside the door on request by the customer, in preparation for the technical installation.