profiPANEL Standard - The design HMI enclosure in standard sizes

IP 54 The key product characteristics: Enclosure material: aluminium profiles corner covers, RAL 7035 Enclosure surface: anodised silver Available in 6 Standard Sizes Installation depths: 90 mm Select enclosure dimensions based on the planned internal mountings Define the machining of the front plate required Define the position of the suspension arm fixing On request, select pro handle(s).

Possible on the side or at the bottom of the enclosure Enclosure seal: PUR To configure this product, please use our practical profiPANEL configurator The economical version of the HMI/control enclosure range with a depth of 90 mm.

For everyone in a rush, who requires only a small batch size or who does not need millimetre-precise dimensions: “We have developed the “profiPANEL Standard” for these customers.

Six standard sizes from a 90 mm basic profile with individually configurable front plate into which every panel PC and additional buttons or switches can be incorporated.<

br>
Possible on the side or at the bottom of the enclosure Enclosure seal: PUR To configure this product, please use our practical profiPANEL configurator The economical version of the HMI/control enclosure range with a depth of 90 mm.

For everyone in a rush, who requires only a small batch size or who does not need millimetre-precise dimensions: “We have developed the “profiPANEL Standard” for these customers.

Six standard sizes from a 90 mm basic profile with individually configurable front plate into which every panel PC and additional buttons or switches can be incorporated.

The rear wall (on the longer side of the enclosure) characteristics locks and hinges.

profiPANEL Standard is quickly available and inexpensive.

The benefits of “profiPANEL Standard” at a glance: Six economical standard sizes to fit panel PCs up to 21'' Inexpensive alternative due to standardisation Shorter delivery times as components are held in stock Customised machining of the front plate Also ideal for smaller order volumes Ingress protection IP 54 Just 4 simple steps to a perfectly coordinated, economical control enclosure:Select enclosure dimensions based on the planned internal mounting.

Define the machining of the front plate required.

Define the position of the suspension arm fixing.

Select optional handle(s).

Side or bottom only available.