Thermostat 195ºC N/C Hex Nut M4 Thread

Product Code: KSD301A-195LA-R

10 Amp 250Vac rated automatic reset thermal cut out suitable for loads of around 2.2kw (maximum). Supplied with an M4 threaded shaft for fitting. This thermal cut out is normally closed (NC), meaning that it is normally in the on position. The thermal cut out will open (turn off) on reaching 195 degrees celsius and reset on temperature drop to 175 degrees celsius. This is a 1/2 inch thermal cut out, not to be confused with the higher rated 3/4 inch thermal cut outs more suitable for higher loads typically found in more powerful power showers. Supplied with 5mm vertical quick connect terminals and enclosed in a ceramic body. Carries TUV and UL approvals at 10A 250Vac complies with RoHS.