6LoWPAN T Click Board™

Product Code: MIKROE-2218

The 6LoWPAN T Click Board™ is based on the CC2520 2.4GHz RF transceiver. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over SPI interface, with additional functionality provided by the following pins on the mikroBUS™ line: PWM, INT, RST, AN. CC2520 Features The CC2520 is TI's second-generation ZigBee®/IEEE 802.15.4 RF transceiver for the 2.4GHz unlicensed ISM band. This chip enables industrial grade applications by offering state-of-the-art selectivity/co-existence, excellent link budget, operation up to 125°C and low voltage operation. In addition, the CC2520 provides extensive hardware support for frame handling, data buffering, burst transmissions, data encryption, data authentication, clear channel assessment, link quality indication and frame timing information. SPECIFICATIONS Type 6LoWPAN Applications IEEE 802.15.4 systems, ZigBee® systems, industrial monitoring and control, home and building automation, Automatic Meter Reading, Low-power wireless sensor networks, etc.

On-board modules CC2520 is TI's second-generation ZigBee®/IEEE 802.15.4 RF transceiver Key Features Selectivity/co-existence, excellent link budget, operation up to 125°C and low voltage operation Interface GPIO,SPI Compatibility mikroBUS Click board size M (42.9 x 25.4 mm) Input Voltage 3.3V PINOUT DIAGRAM This table shows how the pinout of the 6LoWPAN T Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns). Notes Pin Pin Notes General purpose digital I/O RF GPIO0 1 AN PWM 16 RF VREG EN When high, digital voltage regulator is active External reset pin, active low RF RST# 2 RST INT 15 RF GPIO 1 General purpose digital I/O Chip select RF CS 3 CS TX 14 NC Serial clock RF SCK 4 SCK RX 13 NC Master input slave output RF MISO 5 MISO SCL 12 NC Master output slave input RF MOSI 6 MOSI SDA 11 NC Power supply +3.3V 7 3.3V 5V 10 NC Ground GND 8 GND GND 9 GND Ground