7-Seg RGB Click Board™

Product Code: MIKROE-2734

Display Features Each segment has R, G, B LEDs that can be adjusted in 255 steps and therefore 16,581,375 colour combinations are available for each segment of the digit on the display. Also, the ability to control the brightness of all the LED's is driven at 255 steps. It should be noted that brightness values above 80 should rarely be used. Specifications Type 7-segment, LED Segment Applications Displaying digits and letters on a seven-segment in full colour On-board modules RGBdigit full-colour single 7 Segment digit display Key Features Multi-coloured display Interface PWM Compatibility mikroBUS Click board size L (57.15 x 25.4 mm) Input Voltage 3.3V or 5V Pinout Diagram This table shows how the pinout on the 7-SEG RGB Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).

Notes Pin Pin Notes NC 1 AN PWM 16 PWM Data input NC 2 RST INT 15 NC Write enable (active low) CS 3 CS TX 14 NC NC 4 SCK RX 13 NC NC 5 MISO SCL 12 NC NC 6 MOSI SDA 11 NC Power supply +3.3V 7 3.3V 5V 10 +5V Power supply Ground GND 8 GND GND 9 GND Ground Jumpers and settings Designator Name Default Position Default Option Description JP1 Logic level Left 3.3V Data in level Voltage Selection 3V3/5V, left position 3V3, right position 5V