Artistic Licence Jump-Start DMX Tester and RDM Programmer

Product Code: Jump-Start

Output Protocols DMX512-A RDM V1.0 (E1.20 - 2006 ESTA Standard) DMX512 Functions Rig Check - Static / Dynamic Memory Check - Static any combination of channels Dynamic Check - Consecutive group of channels ramping RDM Functions (Get / Set) Start address & personality Lamp strike + power-on Self test + dimmer curve Pan & tilt invert & swap Display brightness and invert Help language RDM Functions (Get) Lamp hours + strikes Product hours + footprint Software version Device reset 5-pin Professional XLR Connection Jump-Start simply attaches to the DMX fixture via a 5-pin XLR connector. It displays various useful information, including start address, footprint, personality, sensors, temperature, voltage and lamp hours. The settings can be edited via the touch-key panel. Test Your Whole Lighting Rig Jump-Start can be plugged into the entire lighting rig to auto-patch all the lights.It can ask a light to strike, dowse or self-test.

Jump-Start also operates as a straightforward DMX tester. Individual channels can be set to a level or ramped continuously. Channel settings can be stored to a memory. Battery Powered Two AA alkaline batteries are used to power Jump-Start. The continuous usage time is around 12 hours and standby time is about 6 months.