Buzz 2 Click Board™

Product Code: MIKROE-2720

The Buzz 2 Click Board™ carries the CMT-8540S-SMT magnetic buzzer transducer. The buzzer's resonant frequency is 4kHz. The click is designed to run on either 3.3V or 5V power supply. How Does The Buzz 2 Click Board™ Work? The CMT-8540S-SMT magnetic buzzer is controlled by the PWM pin on the mikroBUS™ line. You can create different sound patterns using the Sound library supported in our compilers, or utilize the microcontroller internal PWM module to create the signal for the buzzer. Signal frequency determines the sound pitch, and the duty cycle determines the amplitude (sound volume). POWER SUPPLY SELECTION Onboard VCCIO SEL zero-ohm resistor (SMD jumper) is used to determine whether 5V or 3.3V power supply is used. This resistor is placed in 5V position by default. SPECIFICATIONS Type Speakers Applications The Buzz 2 Click Board™ is ideal for adding audio signalization feature to your prototype device On-board modules CMT-8540S-SMT magnetic buzzer transducer Key Features 4kHz resonant frequency Interface PWM Compatibility mikroBUS Click board size M (42.9 x 25.4 mm) Input Voltage 3.3V or 5V PINOUT DIAGRAM This table shows how the pinout on the Buzz 2 Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).

Notes Pin Pin Notes NC 1 AN PWM 16 PWM PWM input NC 2 RST INT 15 NC NC 3 CS TX 14 NC NC 4 SCK RX 13 NC NC 5 MISO SCL 12 NC NC 6 MOSI SDA 11 NC Power supply +3.3V 7 3.3V 5V 10 +5V Power supply Ground GND 8 GND GND 9 GND Ground