Clicker Board 2 for CEC1302

Product Code: MIKROE-1969

Thousands of Possibilities with Click Boards™ With two mikroBUS™ sockets on clicker 2, you can take advantage of the huge potential of Click boards™, the constantly expanding range of over 1204 add-on Click boards™. Blend different functionalities together and come up with new and original inventions. That's just two clicks and your project is half-way done. Go ahead and play with a few ideas right away. Programming To make your prototyping experience as convenient as possible, Clicker 2 for CEC1302 is preprogrammed with a UART bootloader. Just download our mikroBootloader application and you're ready to upload your firmware. On-board mikroProg for CEC connector enables programming through external programmer/debugger. Power Management The Clicker 2 for CEC1302 features LTC®3586, a highly integrated power management and battery charger IC that includes a current limited switching PowerPath manager. LTC®3586 also enables battery charging over a USB connection. You can supply power to the board with a micro USB cable provided in the package.

On-board voltage regulators provide the appropriate voltage levels to each component on the board. Powering Your Inventions Focus on your main idea because clicker 2 will take care of the details for you: your prototype already has a power management system in place. The onboard LTC®3586-1 IC will provide 3.3V or 5V to the clicks. It turns the USB port into a battery charger. For convenience, clicker 2 for CEC1302 features a reset button and an ON/OFF switch (you can also connect an external ON/OFF switch). Processor - CEC1302 has 128 KB SRAM - 32 KB boot ROM - 48MHz Connectivity - 52 programmable GPIOs - 2 mikroBUS host sockets - USB Mini-B connector Expanding Your Ideas No idea is too big for the Clicker 2 for CEC1302. Let your train of thought lead you anywhere. Consider all options, explore all directions. More click boards? Additional electronics? Done and done. clicker 2 has the same pocket-size form factor and the same pair of 1x26 connection pads as mikromedia boards. This makes it compatible with mikromedia shields letting you expand your device any way you want.