Dediprog Quad SPI Adapter for SOP08 207mil Flash Devices

Product Code: QSPI-SOP008207mil-001E

Professional SOP08 Socket Programming Solution The Dediprog QSPI-SOP008207mil-001E socket adapter provides reliable offline programming for quad SPI flash memory devices in 207mil wide SOP08 packages. This precision-engineered adapter features optimised circuitry to enhance programming performance across single, dual, and quad IO modes whilst ensuring consistent connectivity through its zero insertion force (ZIF) socket mechanism. Technical Specifications Package Type SOP08 (207mil width) Pin Count 8 pins Socket Type Open-top ZIF socket PCB Dimensions 64mm × 34mm IC Dimensions 5.28mm × 5.23mm × 2.16mm Pin Pitch 1.27mm (standard) Pin Width 7.9mm span Wiring Quick-Start Guide Connect your SOP08 device following these standard SPI pinout connections: Pin Function Description 1 CS Chip Select (active low) 2 MISO Master In, Slave Out (Data Out) 3 WP Write Protect (active low) 4 GND Ground reference 5 MOSI Master Out, Slave In (Data In) 6 SCK Serial Clock 7 HOLD Hold signal (active low) 8 VCC Power supply (1.8V - 3.6V) Installation Instructions Critical: Align the triangle marker on the adapter's lower-left corner with the corresponding triangle on your Dediprog programmer before connection.

Programmer Connection: Match triangle markers on both adapter and programmer Chip Insertion: Align pin 1 marker (dot or notch) on the chip with the socket's pin 1 indicator Socket Operation: Press down gently on the socket top to retract spring fingers, place chip, then release Verification: Visually confirm proper seating before programming Removal: Use pick-up tool or precision tweezers for safe chip extraction Programming Performance Features Optimised signal integrity for Quad IO, Dual IO, and Single IO modes Enhanced programming yield through precision socket design Reduced contact resistance for reliable data transfer ESD protection circuitry built into PCB design [Socket adapter installation diagram placeholder] // Example read operation in C #include "spi_flash.h" uint8_t read_buffer; // Read 256 bytes from address 0x000000 spi_flash_read(0x000000, read_buffer, 256); // Verify quad mode capability if (spi_flash_supports_quad_io()) { printf("Quad SPI mode supported\n"); }