Hantek CC-65-BNC 65A AC/DC Current Clamp

Product Code: CC-65-BNC

It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms. Its current transducer is composed by permalloy and hall element, which linearly transform the AC or DC current to AC or DC current voltage. And if connect to an oscilloscope by BNC type connector, you're able to observe the current waveforms; If connect to a multimeter by banana type connector, you can obtain the current data. Applications The CC-65 Current Clamp is suitable for AC or DC power circuit measurement and malfunction analysis. It is also suitable for use with motor drive and frequency converter measurements. Oscilloscope Display Specifications DCA Range 1 mV /10mA ±(1.5%±5mA) 10mA ~ 20A 1mV/100mA ±(2%±20mA) 100mA ~ 40A; ±(4%±0.3A) 40A ~ 65A ACA Range 1mV/10mA ±(2%±30mA) 100mA ~ 10A (40Hz ~ 2KHz); ±(4%±30mA) 100mA ~ 10A (2KHz ~ 10KHz); ±(6%±30mA) 100mA ~ 10A (10KHz ~ 20KHz); ±(8%±30mA) 10A ~ 15A (40Hz ~ 20KHz) 1mV/100mA ±(2%±30mA) 200mA ~ 40A (40Hz ~ 1KHz); ±(4%±30mA) 200mA ~ 40A (1KHz ~ 2KHz); ±(6%±30mA) 200mA ~ 40A (2KHz ~ 5KHz); ±(8%±0.3A) 40A ~ 65A (40Hz ~ 20KHz) Captured Conductor Size 9mm maximum Low Battery Indictor Red LED Operating Temperature 0℃ to 50℃, 70% R.H.

Storage Temperature -20℃ to +70℃, 80% R.H. Battery Type 9V DC, NEDA 1604, 6F22,0006P Battery Life 100 hours typical with alkaline Weight 250 gm typical Dimensions 195mm(H) x 70mm(W) x 33mm(D) Output Supplied with coil cable with straight BNC plug.