Hantek HT2018BX Automotive Battery Tester
Product Code: HT2018BX
Features The Hantek HT2018BX is a compact battery tester with a built-in LCD and sturdy test leads, terminated with robust Aligator clips. The case has been designed to withstand the knocks of the garage workshop and has an anti-slip finish which makes it easy to hold when being used. The tester monitors the battery voltage and current under a range of conditions. The tester can also be used with the battery connected to the car, or stand-alone. The Tester can function in four different test modes: Battery Starting Mode Before starting any tests, you need to tell the tester some information about the battery: Battery Voltage (6V, 12V or 24V) The maximum Cold Cranking Amps (CCA) of the battery Charging System Test Once the car has started, the tester will check that the battery is being charged, making it possible to determine if the car's charging system is functioning correctly. The battery voltage is displayed onscreen. Normal Load Test The tester will perform repeated load tests and monitor the battery voltage at each step to determine the ability of the battery to hold its charge.
Test Results
When the battery tests are complete, the State of Health (SOH) is displayed as a percentage. This figure gives a good indication of the condition of the battery. The internal resistance of the battery is also displayed. The estimated battery capacity is also displayed.
Protection Against Misuse
The HT2018BX has built-in protection against reverse polarity so there is no need to worry about the occasional mis-connection. Over-voltage protection is also built-in when connecting to batteries.
Specification
Function
Range
Cold Starting Current
CCA
100~1700
IEC
100~1000
EN
100~1700
DIN
100~1000
JIS
100~1700
Battery Internal Resistance
0.00mΩ~99.99mΩ
Battery Voltage
4.5V~30V
Test Batteries
6V、12V、24V
Starting Load Test
√
Charging System Test
√
Electric Load Test
√
Reverse Connection Protection
√
Lattice LCD Display
√
Cable Length
600mm
Dimension
143×77×28mm
Weight
270g
Visit the Debug Store website for more information on Hantek HT2018BX Automotive Battery Tester