Hantek MPO-6202D 2-ch 200MHz Oscilloscope

Product Code: MPO-6202D

Specifications Oscilloscope Function Acquisition Real-time sample rate 1 GSa/s（single channel） 500 MSa/s（two channels） Note：digital channel 12，34 open at the same time,it is considered as one channel Peak detection Analog channel 4ns Note：digital channels don't support Average mode Analog channel All channels reach N time samples at the same time，N can be selected from 2、4、8、16、32、 64、128、256、512 and 1024. Note：digital channels don't support High resolution Up to 12bit Note：digital channels don't support Minimum test pulse width 8ns Memory depth Single channel 64M Two channels 32M Input Channel quantity 4 analog channels Note：data channels can't be opened 3 analog channels Note：digital channel LA1/LA2/LA3/LA4/LA1LA2/LA3LA4 2 analog channels Note：digital channels infinitize 1 analog channel Note：digital channels infinitize 0 analog channel Note：digital channels infinitize Input coupling DC、AC or GND Note：digital channels don't support Input impedance，DC coupling Analog channel 25pF±3 pF，1MΩ±2% Digital channel (300KΩ±2%) ，(8 pF±3 pF) Supported probe attenuation factor Analog channel 1X、10X、100X、1000X Voltage classes 300V CAT II Maximum input voltage Analog channel 300VRMS (10X) Digital channel -25V~25V Horizontal Waveform interpolation (sin x)/x Maximum record length Single channel maximum 64M Two channels maximum32M three/four channels maximum 16M Horizontal scale range DSO6084 DSO6104 2ns/div~100s/div 1， 2， 5 step by step Time base mode Y-T、X-Y、Roll X-Y number Channel 1,2 1 XY channel、channel3 4 1 XY channel Zero offset ±0.5 div× minimum time base gear Sample Rate and ±25ppm Delay Time Accuracy Clock drifting ≤±5 ppm/year Delta Time Measurement single，"acquisition"mode Accuracy (Full Bandwidth) ±（1 sample interval+100ppm×reading+0.6ns） ＞16 times averages ±（1 sample interval+100ppm×reading+0.4ns） Sample interval=sec/div÷200 Vertical Bandwidth（-3db） DPO6082 DPO6102 DPO6202 80MHz 100MHz 200MHz Vertical resolution Analog channel 8bit Digital channel 1bit Vertical scale range nput BNC position is 500μV/div~10V/div Position range 500μV/div to 120mV/div，±1V 122mV/div to 1.2V/div，±10V 1.22V/div to 10V/div，±50V Optional analog bandwidth limitation Typical 20MHz Bass response（-3db） In BNC position is≤10Hz Rising time in BNC position，typical DPO6082 DPO6102 DPO6202 ≤4.4ns ≤3.5ns ≤1.8ns Vertical gain accuracy In "normal" or "average" acquisition mode，the accuracy of 10V/div to 10mV/div is ±3% In "normal" or "average" acquisition mode，the accuracy of 5mV/div to 500uV/div is ±4%.

DC offset accuracy ±0.1 div±2 mV±1% offset value The isolation of channels DC maximum bandwidth：>40 dB Note: Bandwidth reduced to 6MHz when using a 1X probe Trigger Trigger level range ±5 divisions from the center of the screen Trigger mode auto、general、single Level CH1~CH2 ±4 divisions from the center of the screen Holdoff range 8ns~10s Trigger level accuracy CH1~CH2 0.2 div×volts/div within ±4 divisions from the center of the screen Edge trigger Slope Rising edge，falling edge，rising or falling edge Signal source CH1~CH2， D1.0~D1.3， D2.0~D2.3， D3.0~D3.3， D4.0~D4.3 Pulse width trigger Polarity Positive polarity，negative polarity Condition(When) <，>， !=， = Signal source CH1~CH2， D1.0~D1.3， D2.0~D2.3， D3.0~D3.3， D4.0~D4.3 Pulse width range 8ns ~ 10s Video trigger Signal standard NTSC， PAL Signal source CH1~CH2 Synchronization Scanning line、line number、odd field、even field、all field Slope trigger Slope rise，fal condition(When) <，>， !=， = Signal source CH1 ~ CH2 Time range 8ns ~ 10s Overtime trigger Signal source CH1~CH2， D1.0~D1.3， D2.0~D2.3， D3.0~D3.3， D4.0~D4.3 Polarity Positive polarity，negative polarity Time range 8ns ~ 10s Window trigger Signal source CH1~CH2LA1~LA4 Pattern trigger Pattern 0:low level；1:high level；X:ignore； Level（signal source） CH1~CH2 Interval trigger Slope rise，fall condition(When) <，>， !=， = Signal source CH1~CH2， D1.0~D1.3， D2.0~D2.3， D3.0~D3.3， D4.0~D4.3 Time rangeTime range 8ns ~ 10s Delay trigger Edge type Rising edge，falling edge Signal source CH1~CH2 condition(When) <，>， !=， = Time range 8ns ~ 10s Set up hold trigger Edge type Rising edge，falling edge Signal source CH1~CH2 condition(When) <，>， !=， = Time range 8ns ~ 10s Runt trigger Polarity Positive polarity，negative polarity Condition(When) <，>， !=， = Signal source CH1~CH2 Time range 8ns ~ 10s UART trigger condition(When) start、stop、data、odd-even check、reception error Signal source(RX/TX) CH1~CH2， D1.0~D1.3， D2.0~D2.3， D3.0~D3.3， D4.0~D4.3 Data format Hex（hexadecimal） Data length 1 byte Data bit width 5 bit， 6 bit， 7 bit， 8 bit Odd-even check none、odd、even Free level high、low Baud rate (optional) 110/300/600/1200/2400/4800/9600/14400/19200/38400/57600/11520 0/230400/380400/460400 bit/s Baud rate(user-defined) 300bit/s~334000bit/s LIN trigger condition(When) Interval field、synchronization fi