Keylock Click Board™

Product Code: MIKROE-2564

The Keylock Click Board™ carries a processed sealed key lock mechanism that can be set in three different positions. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over the PWM, INT, and AN pin on the mikroBUS™ line. The key can be removed from the lock in any of the three positions. The package contains two keys and one protective cap. KEYLOCK FEATURES The contact mechanism provides unequaled logic-level reliability and smoother, positive detent actuation. Detent mechanism, with its spring-operated steel ball, gives crisp, positive action for accurate switch setting. SPECIFICATIONS Type Pushbutton/Switches Applications Use the three different positions of the mechanism to turn applications on or off, for home security applications, for industrial equipment, etc. On-board modules Keylock switch with 3 positions Key Features Detent mechanism, with its spring-operated steel ball, gives crisp, positive action for accurate switch setting Interface GPIO Compatibility mikroBUS Click board size S (28.6 x 25.4 mm) Input Voltage 3.3V or 5V PINOUT DIAGRAM This table shows how the pinout of the Keylock Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).

Notes Pin Pin Notes Output position 1 1 1 AN PWM 16 2 Output position 2 NC 2 RST INT 15 3 Output position 3 NC 3 CS TX 14 NC NC 4 SCK RX 13 NC NC 5 MISO SCL 12 NC NC 6 MOSI SDA 11 NC Power supply +3.3V 7 3.3V 5V 10 +5V Power supply Ground GND 8 GND GND 9 GND Ground