Lineeye LE-2500XR(V2)-E Multi Protocol Analyzer

Product Code: LE-2500XR(V2)-E

Equipped with a colour LCD display This model has a 4.3-inch colour touch display with a wide viewing angle. The communication data which can be displayed on one screen has increased compared to the conventional model, and the colour monitor makes the line monitor display easier to see. In particular, the visibility of the line state signal display and error data display has dramatically improved. Monitor example of normal data Monitor example of data with errors   Line state display Logic analyzer display Time Stamp Display Date/time unit "year/month/day hour:minute", "month/day hour:minute:second", "day hour:minute:second.10msec", etc. can be specified. Idle Time Display Time resolution 100msec, 10msec, 1msec can be specified Error and Specific Data Display     Hybrid operation of capacitive touch panel and physical key switch The capacitive touch panel offers intuitive touch selection and swipe operations like a smartphone. it supports key switch operation for when wearing gloves. The key operation similar to the conventional model is inherited as the shortcut key operation Swipe to scroll monitored communication data up/down/left/right   Efficient text input by using the full keyboard displayed on the screen Shortcut keys example [MENU] and [0] Configuration display[MENU] and [2] Trigger display[MENU] and [4] Waveform monitor setting[MENU] and [9] Data table selection display Key operation is useful for some functions In the MANUAL simulation mode, in which communication test data is assigned to the keys and the communication response of the device under test is checked on the screen while the test data is sent by key operation, the key operations is useful as the monitor display screen can be widely used.

Example of LE-2500XR       Supports multiple communication protocols and interfaces This model supports the measurement of RS-232C, RS-422/485, and TTL (1.8V-5V system) signal level UART communication, I2C, and SPI. A wide range of options are available to extend the measurement function to legacy ports such as X.20/21 and V.35, current loop communication, and in-vehicle communication such as CAN, CAN FD, LIN, and CXPI.     The TTL measurement port supports external trigger input/output This external trigger input/output terminal can be used for 1.8V/2.5V/3.3V/5V signal level UART communication, I2C, SPI measurement and measurement linked with an external measuring instrument. TTL measurement port *1: 2.54mm pitch, HIF3FC-10PA-2.54DS(71) Hirose Electric equivalent*2: Output during simulation, but SS and SCK are input during SPI slave*3: Output the specified voltage of TTL port during simulation (maximum 30mA)   5-wire TTL Connection Cable It can be used for the connection of TTL communication signals and external trigger signals.If you use both at the same time, please purchase extra. The RS-422/485 measurement port is a removable terminal block The RS-422/485 cable can be directly connected to the port. When you temporarily need to disconnect the analyzer from the monitor line, you do not need to screw off the cable, you just need to detach the terminal. RS-422/485 interface setting RS-485 Connection     Supports DSUB 9-pin and DSUB 25-pin of RS-232C as standard The RS-232C measurement port adopts the DSUB25 pin where the transmission/reception synchronization clock signal is arranged. As the product includes a DSUB 25-pin monitor cable, DSUB 25-pin to 9-pin conversion adapter, and DSUB 9-pin monitor cable, it can be connected to both DSUB 25-pin and DSUB 9-pin of an RS-232C device.   Line Monitor Various line monitor displays according to the communication protocol Flexible support for ASYNC asynchronous communication from legacy to present It can monitor asynchronous communication in which one data consists of a start bit, data bits (5 to 8 bits), parity bit (none, odd number, even, mark, space, or multiprocessor bit definition MP), and stop bit (1, 2 bits).The MSB first transfer of the legacy protocol can be selected, and the suppression (removal) of the flag character is supported by the ASYNC-PPP protocol. Bit synchronous communication such as character synchronous communication and HDLC BSC communication synchronized with the SYNC character and HDLC/SDLC synchronized with the flag bit can be measured. It supports BCC/FCS (block check code/frame check sequence) judgment and HDLC address filters. NRZ, NRZI, FM0, FM1 data modulation formats can be selected. You can easily monitor SPI and I2C of TTL level communication You can easily monitor I2C and SPI communication used in sensor modules, AD conversion ICs, memory ICs, etc. Also, transmission/reception tests can be performed on the master side or slave side. I2C monitoring example SPI monitoring example Logic analyzer function and signal voltage measurement function The analyser has a logic analyzer function that can measure the timing of communication lines with a time resolution of up to 50 nsec. It also has a function to measure