Lineeye LE-3500XR(V2)-E Handheld Multi-Protocol Serial Analyser

Product Code: LE-3500XR(V2)-E

Smaller and Lighter With Full Communication Analysis Functionality The LE-3500XR(V2)-E is smaller and lighter than the conventional models while fully equipped with the online monitor function which records and displays communication data without affecting the communication line, the simulation function which performs transmit/receive test as a communication partner, and the bit error rate test (BERT) function. Equipped With a Colour LCD The LE-3500XR-E has a 4.3-inch colour touch display with a wide viewing angle. The communication data which can be displayed on one screen has increased compared to the conventional model, and the color monitor makes the line monitor display easier to see. In particular, the visibility of the line state signal display and error data display has dramatically improved.               Time Stamp Display Date/time unit "year/month/day hour:minute", "month/day hour:minute:second", "day hour:minute:second.10msec", etc. can be specified. Idle Time Display Time resolution 100msec, 10msec, 1msec can be specified Error and Specific Data Display Hybrid operation of capacitive touch panel and Physical Key Switch The capacitive touch panel offers intuitive touch selection and swipe operations like a smartphone.

it supports key switch operation for when wearing gloves. The key operation similar to the conventional model is inherited as the shortcut key operation Swipe to scroll monitored communciation data up/down/left/right   Efficient text input by using the full keyboard displayed on the screen Shortcut keys example [MENU] and [0] Configuration display[MENU] and [2] Trigger display[MENU] and [4] Waveform monitor setting[MENU] and [9] Data table selection display[MENU] and [F] Program edit display of the PROGRAM mode Key operation is useful for some functions In the MANUAL simulation mode, in which communication test data is assigned to the keys and the communication response of the device under test is checked on the screen while the test data is sent by key operation, the key operations is useful as the monitor display screen can be widely used.     Supports Multiple Communication Protocols and Interfaces This model supports measurement of RS-232C, RS-422/485, and TTL (1.8V-5V system) signal level UART communication, I2C, and SPI. A wide range of options are available to extend the measurement function to legacy ports such as X.20/21 and V.35, current loop communication, and in-vehicle communication such as CAN, CAN FD, LIN, and CXPI. The TTL measurement port supports external trigger input/output This external trigger input/output terminal can be used for 1.8V/2.5V/3.3V/5V signal level UART communication, I2C, SPI measurement and measurement linked with an external measuring instrument.       *1: 2.54mm pitch, HIF3FC-10PA-2.54DS(71) Hirose Electric equivalent*2: Output during simulation, but SS and SCK are input during SPI slave*3: Output the specified voltage of TTL port during simulation (maximum 30mA) It can be used for connection of TTL communication signals and external trigger signals.If you use both at the same time, please purchase extra. The RS-422/485 measurement port is removable terminal block The RS-422/485 cable can be directly connected to the port. When you temporarily need to disconnect the analyzer from the monitor line, you do not need to screw off the cable, you just need to detach the terminal. Supports DSUB 9-pin and DSUB 25-pin of RS-232C as standard The RS-232C measurement port adopts the DSUB25 pin where the transmission/reception synchronization clock signal is arranged. As the produt includes a DSUB 25-pin monitor cable, DSUB 25-pin to 9-pin conversion adapter, and DSUB 9-pin monitor cable, it can be connected to both DSUB 25-pin and DSUB 9-pin of a RS-232C device. Various Line Monitor Displays According to the Communication Protocol Flexible support for ASYNC asynchronous communication from legacy to present It can monitor asynchronous communciation in which one data consists of a start bit, data bits (5 to 8 bits), parity bit (none, odd number, even, mark, space, or multiprocessor bit definition MP), and stop bit (1, 2 bits).The MSB first transfer of the legacy protocol can be selected, and the suppress (removal) of the flag character is supported by the ASYNC-PPP protocol. Bit synchronous communication such as character synchronous communication and HDLC BSC communication synchronized with the SYNC character and HDLC/SDLC synchronized with the flag bit can be measured. It supports BCC/FCS (block check code/frame check sequence) judgment and HDLC address filters. NRZ, NRZI, FM0, FM1 data modulation formats can be selected. Support Modbus, a fieldbus protocol, as a standard Even in high-speed Modbus communication, it can accurately detect the idle time (silent interval) for 3.5 characters and then separate and measure the communication frames. It supports Modbus-ASCII and Modbus-RTU data formats, and the LRC/CRC frame check is automatical