SEGGER J-Link WiFi Wireless Debug Probe (8.14.28)

Product Code: 8.14.28

Professional Wireless Debugging for Mobile Applications The J-Link WiFi represents a breakthrough in embedded debugging technology, combining SEGGER's industry-leading debug capabilities with wireless connectivity. This JTAG/SWD debug probe operates at speeds up to 15MHz, delivering professional-grade debugging performance through a stable WiFi interface. Wireless Freedom for Modern Development Eliminate the constraints of physical connections when debugging mobile applications, robotic systems, or embedded devices that require movement during testing. The J-Link WiFi enables remote debugging scenarios previously impossible with traditional wired probes. Key Applications: Mobile robotics, IoT devices in hazardous environments, rotating machinery, and any application where physical cable connections prove impractical or dangerous. Wiring Quick-Start Connect your target system using the standard 20-pin JTAG/SWD interface: Pin Signal Description 1 VTref Target reference voltage (1.2V - 5V) 7 SWDIO Serial Wire Data I/O (bidirectional) 9 SWCLK Serial Wire Clock 13 SWO Serial Wire Output (trace data) 15 nRESET Target reset (active low) 19 5V Supply Target power (max 300mA) Even-numbered pins (2, 4, 6, 8, 10, 12, 14, 16, 18, 20) connect to ground.

Network Configuration The J-Link WiFi includes a built-in web server for easy network configuration. Connect via USB initially to configure WiFi settings through the web interface at the device's IP address. // Example GDB connection via WiFi target remote 192.168.1.100:2331 monitor reset load continue Professional Software Suite Includes comprehensive licenses for: Unlimited Flash Breakpoints J-Flash programming software Ozone graphical debugger RDI/RDDI interfaces GDB Server