SHT AN Click Board™

Product Code: MIKROE-3984

How Does The SHT AN Click Board™ Work? The SHT AN Click Board™ is featuring SHT31-ARP-B that was built on a completely new and optimized CMOSens® chip, which allows for increased reliability and improved accuracy specifications. Sensor can be ordered with filter membrane which is a PTFE film that protects sensor from opening from water and dust. Since the SHT31-ARP-B is a temperature and humidity (T and RH) sensor with two analog outputs for each measurement, and on the mikroBUS socket we have only one Analog output we multiplexed sensor output by suing 74LVC1G3157GV, 2-channel analog multiplexer/demultiplexer. Switching between temperature and humidity measurements is performed by asserting the selection input (SEL) which is connected to the multiplexer and by that way selecting desired data output. Measured data is supplied as radiometric voltage output, after reading the temperature or humidity analog signal user will have to do conversion to a physical value. The physical values as measured by the sensor are mapped to a radiometric voltage output (VT, VRH as 10 to 90% of VDD).

Prior to conversion into a voltage signal, the physical values are linearized and compensated for temperature and supply voltage effects by the sensor. Additionally, the voltage output is calibrated for each sensor. The nRST pin is active low and may be used to generate a reset of the sensor. A minimum pulse duration of 1 µs is required to reliably trigger a reset. The nRST signal is routed to the mikroBUS™ RST pin. The SHT AN Click Board™ can be supplied and interfaced with both 3.3V and 5V without the need for any external components. The onboard SMD jumper labelled as VCC SEL allows voltage selection for interfacing with both 3.3V and 5V microcontrollers. SPECIFICATIONS Type Temperature & humidity Applications Industrial RH and temperature measuring applications, smart home, air conditioner, home and environmental monitoring, etc... On-board modules SHT AN Click uses the SHT31-ARP, a high accuracy temperature and humidity sensor from Sensirion. Key Features Key Features Low energy consumption, wide temperature and humidity operating range with low RH response time, small package Interface Analog,GPIO Compatibility mikroBUS Click board size S (28.6 x 25.4 mm) Input Voltage 3.3V or 5V PINOUT DIAGRAM This table shows how the pinout of the SHT AN Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns). Notes Pin Pin Notes Analog Output AN 1 AN PWM 16 NC Sensor Reset RST 2 RST INT 15 NC Selection of measurement channel SEL 3 CS RX 14 NC NC 4 SCK TX 13 NC NC 5 MISO SCL 12 NC NC 6 MOSI SDA 11 NC Power Supply 3.3V 7 3.3V 5V 10 5V Power Supply Ground GND 8 GND GND 9 GND Ground ONBOARD SETTINGS AND INDICATORS Label Name Default Description LD1 PWR - Power LED Indicator JP2 VCC SEL Left Power Supply Voltage Selection Jumper: Left position 3.3V, right position 5V SHT AN CLICK ELECTRICAL SPECIFICATIONS Description Min Typ Max Unit Supply Voltage 2.4 - 5.5 V Operating Temperature Range -40 - 125 °C Temperature accuracy - +/- 0.3 - °C Humidity accuracy - +/- 2.0 - %RH