Temp&Hum 23 Click Board™

Product Code: MIKROE-5301

How Does The Temp&Hum 23 Click Board™ Work? The Temp&Hum 23 Click Board™ is based on the SHT45, a digital sensor platform for measuring relative humidity and temperature at different accuracy classes from Sensirion. The SHT45 builds on a wholly new and optimized CMOS chip offering reduced power consumption, accuracy, and a digital I2C interface for the fastest data transfer. It covers extended operating humidity, and temperature ranges from 0 to 100%RH and from -40°C to 125°C with accuracies of ±1%RH and ±0.1°C. The SHT45 communicates with MCU using the standard I2C 2-Wire interface. The sensor performs best when operated within the recommended average temperature and humidity range of 5-60°C and 20-80%RH. Long-term exposure to conditions outside recommended normal range, especially at high relative humidity, may temporarily offset the RH signal. After returning to the recommended average temperature and humidity range, the sensor will recover to within specifications by itself. The Temp&Hum 23 Click Board™ can be operated only with a 3.3V logic voltage level.

The board must perform appropriate logic voltage level conversion before using MCUs with different logic levels. However, the Click board™ comes equipped with a library containing functions and an example code that can be used, as a reference, for further development. SPECIFICATIONS Type Temperature & humidity Applications Can be used for high-volume applications On-board modules SHT45 - relative humidity and temperature sensor from Sensirion Key Features Low power consumption, high accuracy, covers extended operating humidity and temperature ranges, internal heater, fully functional in condensing environment, fast data transfer, and more Interface I2C Compatibility mikroBUS Click board size S (28.6 x 25.4 mm) Input Voltage 3.3V PINOUT DIAGRAM This table shows how the pinout of the Temp&Hum 23 Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns). Notes Pin Pin Notes NC 1 AN PWM 16 NC NC 2 RST INT 15 NC NC 3 CS RX 14 NC NC 4 SCK TX 13 NC NC 5 MISO SCL 12 SCL I2C Clock NC 6 MOSI SDA 11 SDA I2C Data Power Supply 3.3V 7 3.3V 5V 10 NC Ground GND 8 GND GND 9 GND Ground ONBOARD SETTINGS AND INDICATORS Label Name Default Description LD1 PWR - Power LED Indicator TEMP&HUM 23 CLICK ELECTRICAL SPECIFICATIONS Description Min Typ Max Unit Supply Voltage - 3.3 - V Temperature Accuracy - ±0.1 - °C Relative Humidity Accuracy - ±1 - %RH Resolution - 16 - bit Operating Humidity Range 0 - 100 %RH Operating Temperature Range -40 +25 +125 °C