Thermo 5 Click Board™

Product Code: MIKROE-2571

The Thermo 5 Click Board™ can be used to measure temperatures with up to two/three externally connected diodes. Each external diode channel is configured with Resistance Error Correction and Beta Compensation based on user settings and system requirements. The device contains programmable High, Low, and Thermo limits for all measured temperature channels. If the measured temperature goes below the Low limit or above the High limit, the ALERT pin can be asserted (based on user settings). If the measured temperature meets or exceeds the Thermo Limit, the THERM pin is asserted unconditionally, providing two tiers of temperature detection. EMC1414 FEATURES The EMC1414 monitors four temperature channels. It provides ±1°C accuracy for both external and internal diode temperatures. Resistance Error Correction feature automatically eliminates the temperature error caused by series resistance allowing greater flexibility in routing thermal diodes. Beta Compensation feature eliminates temperature errors caused by low, variable beta transistors common in today's fine geometry processors.

SPECIFICATIONS Type Temperature & humidity Applications Personal computers, electronics equipment, industrial controllers On-board modules EMC1414 temperature sensor Key Features ±1°C accuracy, 0.125°C resolution Interface GPIO,I2C Compatibility mikroBUS Click board size S (28.6 x 25.4 mm) Input Voltage 3.3V PINOUT DIAGRAM This table shows how the pinout on the Thermo 5 Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns). Notes Pin Pin Notes NC 1 AN PWM 16 NC NC 2 RST INT 15 INT ALERT/THERM Interrupt Output NC 3 CS TX 14 NC NC 4 SCK RX 13 NC NC 5 MISO SCL 12 SCL I2C Clock NC 6 MOSI SDA 11 SDA I2C Data Power supply +3.3V 7 3.3V 5V 10 NC Ground GND 8 GND GND 9 GND Ground